Easycare

Easycare Boot Studs

MSRP:
Was:
Now: £18.40
(You save )
(No reviews yet) Write a Review

Description

Easycare Hoof Boot Studs are suitable for most hoof boots.

  • The studs come in a set of 4 which is suggested for a single boot as pictured.
  • Use a minimum of 2 studs in the heel of the hoof boots or 4 per boot ideally for an even feel.
  • Studs are screwed through holes that are drilled in the bottom of the hoof boot and can be screwed in and taken out as required.

Easycare studs are ideal to help give extra traction on wet, slippery or muddy ground.

Easyboot studs are compatible with Easyboots, Old Macs and Boa Hoof Boots. 

  • 3/4" studs are suitable for Easyboot, Epic, Glove and Back Country style boots in up to size 4.
  • 1" studs are suitable for Easyboot and Epic sizes 5, 6 and 7, and all sizes of Old Mac G2's and Easyboot Trail boots.

Things to keep in mind when using studs...

  • Make sure your boots fit well and your horse is acclimated to wearing them before you apply studs
  • Always apply studs to both boots for proper balance
  • Do not turn horses out wearing studded boots, as a horse could injure themselves and others with studded boots.
  • When drilling, make sure the stud does not extend past the sole of the foot. This can especially be a problem on older boots with worn soles as it can cause pressure points on the inside of the boot.
  • Use caution when installing studs in used boots, as the sole tread is thinner than when new. Studs may penetrate through older well-worn soles.
  • Always use your best judgment when going out for a ride in slippery conditions. Hoof boots provide extra traction, but they do have their limits.

Additional Details

Sold in:
Sets of 4 studs

Related Products